Acer 710 사용자 설명서

Chapter 4

4-1

Use the following procedure as a guide for computer problems.

Note: The diagnostic tests are intended to test only Acer products. Non-

Acer products, prototype cards, or modified options can give false 
errors and invalid system responses.

1.  Obtain the failing symptoms in as much detail as possible.

2.  Verify the symptoms by attempting to re-create the failure by running the 

diagnostic test or by repeating the same operation.

Note: To run the diagnostics, refer to “Running the Diagnostics”.

3.  Use the following table with the verified symptom to determine which page 

to go to. Search the symptoms column, and find the description that best 
matches your symptom; then go to the page shown in the “Go To” column.

Power failure. (The power indicator 
does not go on or stay on.)

“Power Systems Checkout”.

POST does not complete. No beep or 
error codes are

indicated.

“Symptom-to-Spare Part Index”, and 
then use the No Beep Symptoms table.

POST beeps, but no error codes are 
displayed.

“Symptom-to-Spare Part Index”, and 
then use the Beep Symptoms table.

POST detected an error and displayed 
numeric error codes.

“Symptom-to-Spare Part Index”, and 
then use the Numeric Error Codes 
table.

The diagnostic test detected an error 
and displayed a Spare Part code.

“Running the Diagnostics”.

The configuration is not the same as 
the installed devices.

“Checking the Installed Devices List”.

Other symptoms (such as LCD display 
problems).

“Symptom-to-Spare Part Index”, and 
then use the Other Symptoms table.

Symptoms cannot be re-created 
(intermittent problems).

Use the customer-reported

symptoms and go to “Symptom-to-
Spare Part Index”.

C h a p t e r 4

700SG-4.fm  Page 1  Thursday, May 28, 1998  1:13 PM