Acer 710 사용자 설명서

Chapter 4

4-15

There is an EEPROM in the inverter which stores its supported LCD type ID 
code. If you replace a LCD with one of a different brand or use a new inverter, 
the ID information in the inverter EEPROM should be updated.

Follow the steps blew to see the LCD Panel ID:

1.  Follow the instruction on screen to read current or to set new LCD Panel 

ID code.

Note: When you set a new LCD Panel ID and the new LCD is not yet 

enabled (to function), so connect an external CRT to see the 
program execution process.

Note:  Make sure the new ID code you choose corresponds with the LCD 

brand and type. If you write a wrong ID into inverter, just reboot and 
re-execute the program and input the correct ID code.

2.  Restart computer - the new LCD should work normally.

Note: If LCD cannot display after change ID code, make sure you write 

the correct ID code, or try reseating the LCD FPC cable connectors.

The system is equipped with sensors to protect against system overheating. 
By setting System and processor thermal thresholds, the system can turn on 
the cooling fan or shut down automatically when temperatures reach the 
defined threshold parameters.

700SG-4.fm  Page 15  Thursday, May 28, 1998  1:13 PM