Gigabyte M1405 사용자 설명서

18

The M1405 features a preinstalled DVD Super Multi Optical Writer 

Drive. When in use, the drive has a flashing LED in the face and will

not open. 

It supports a wide range media types. The drive can also support or 

play Dual Layer types. 

1 CD-R - These discs can be written on once. The data put on the 

disc cannot be changed or erased/deleted. 

2 CD-RW -These discs can be written to more than once and can 

be erased. They have a limited number of erases. 

For a Super Multi DVD Writer drive

1 DVD-R and DVD+R discs - These can only written on once. The

data on the DVD Disc cannot be changed or erased/deleted.

2 DVD-RW, DVD+RW and DVD-RAM discs support being written on

to more than once. They have a limited number of erases.

1 DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer)

discs can only be written on once. As with other write once discs 
the data that is on the discs cannot be changed or erased/deleted. 

2 DVD-RW, DVD+RW and DVD-RAM discs can be recorded to

more than once. They have a limited number of erases.

To open the optical disc drive, press the button on the drive shown 

below and the drive will pop out. Pull the drive gently to extend it.

Media will then need to be pressed onto the center spindle to secure 

the media. To close the drive simply press it closed until it clicks into 

place. The drive will then initialize and the disc will be read by the 

drive.

Drive Release Button

1

2

1. Press the drive release button to

open the drive. Pull gently once it

pops open. 

2. Place  the  disc  into  the  center

of the drive and click into place 

onto the round spinner section to 

secure the disc. 

3. Close the drive to initiate reading

of the disc.