Gateway E-155c 사용자 설명서
www.gateway.com
39
Replacing the cooling fan
Tools you need to complete this task:
v
Screws removed during this task:
To replace the cooling fan:
1
Complete the steps in
2
3
.
4
Remove the DVD drive by following the steps in
.
5
Remove the hard drive by following the steps in
6
Remove the palm rest by following the steps in
.
7
Remove the system board by following the steps in
.
8
Turn the system board over so the bottom is facing up.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
1 black 2.5*3.0 (DVD
drive)
drive)
3 black 2.5*6.0 (Palm
rest-top)
rest-top)
3 black 2.5*4.5 (System
board)
board)
2 black 2.0*3.0 (cooling
fan)
fan)
7 black 2.5*4.5 (Palm
rest-bottom)
rest-bottom)
2 black 2.0*6.0 (Palm
rest-bottom)
rest-bottom)
3 black 2.5*3.0 (Palm
rest-DVD drive bay)
rest-DVD drive bay)
3 black 2.5*2.2 (Palm
rest-hard drive bay)
rest-hard drive bay)
2 black 2.5*3.0 (hard
drive)
drive)