ONKYO DS-A4 사용자 설명서

15

■ There’s no sound

• Make sure your iPod/iPhone is actually playing.
• Make sure your iPod/iPhone is inserted properly in 

the RI Dock.

• Make sure your amp is turned on, the correct input 

source is selected, and the volume is turned up.

• Make sure the plugs are pushed in all the way.
• Make sure the AC adapter is connected to a suit-

able wall outlet and connected to the RI Dock.

■ The RI Dock’s remote controller doesn’t 

• If the RI Dock is placed on top of another compo-

nent, the remote controller’s signal may be 
obstructed and the remote controller may not 
work reliably. In this case, try repositioning the RI 
Dock.

• Make sure your iPod/iPhone is properly inserted in 

the RI Dock.

• When you use the RI Dock’s remote controller, 

point it toward the RI Dock (see page 7).

• Some of the remote controllers buttons work dif-

ferently depending on the OSD mode: On or Off 
(see page 6).

■ Your amp’s remote controller doesn’t con-

• Make sure your iPod/iPhone is properly inserted in 

the RI Dock.

• If your amp’s remote controller has remote mode 

buttons, make sure you’ve selected the right 
mode.

• Check the RI Dock’s RI MODE switch setting.
• When you use your amp’s remote controller, point 

it toward your amp.

• The RI Dock must be connected to your amp with 

both an  cable and an audio cable.

• Make sure the RI Dock’s RI MODE switch setting 

and the remote control mode match this setting. 
See your amp’s manual for more information. 
If you still can’t control your iPod/iPhone, start 
playback by pressing your iPod/iPhone model’s 
Play button. Remote operation should then be 
possible. 

• Make sure your amp’s remote controller is set to 

the correct remote control ID.

■ The onscreen display doesn’t appear on 

• Set the OSD mode to On (see page 9).
• Try setting the TV system to PAL or NTSC (see 

• Select the video output mode (composite/compo-

nent) according to the video input on your TV (see 
page 9).

■ To watch an iPod/iPhone slideshow or 

• Set the OSD mode to Off, and use your 

iPod/iPhone model’s controls or remote controller 
to select and start the slideshow or video.

• To control the slideshow, follow standard 

iPod/iPhone operating procedures.

Power supply:

AC adapter (5 V DC)

Power consumption (iPod/iPhone not inserted): 

North American model: 0.8 W 
Other models: 0.8 W

Weight: 

0.66 lbs. (300 g)

Dimensions (W x H x D):  4-5/16 x 2-1/8 x 4-7/16 inches

110 x 54 x 112 mm

Connectors: VIDEO 

OUT 

(COMPONENT/VIDEO)

AUDIO OUT L/R
 jack

Specifications and features are subject to change 
without notice.
In catalogs and on packaging, the letter at the end of 
the product name indicates the color. Specifications 
and operation are the same regardless of color.

• The operating instructions in this manual may 

change with future upgrades to the iPod/iPhone 
software. 

• The AC adapter supplied with the RI Dock is 

designed exclusively for use with the RI Dock. Do 
not use it with another device. Likewise, do not 
use any other AC adapter with the RI Dock. Doing 
so may damage the RI Dock.

• If there’s any noise when listening to an FM or AM 

radio station on your tuner or receiver, try mov-
ing its antenna away from the RI Dock, 
iPod/iPhone, and AC adapter’s cable. In addition, 
don’t wrap the AC adapter’s cable around any 
other cables.