Fujitsu 480 사용자 설명서

7-76

C122-E003-02EN

GSWB
CHAPTER 7 Web-UI Operations

 

Table 7.77  Buttons in the [MAC Address Table] window

[Switch] 

→

 [GSWB#x] 

→

 [MAC Bridge] 

→

 [MAC Address Table]

• Display

1 Specify the search conditions.  Multiple search conditions cannot be 

specified.

2 Click the [Query] button.
3 Only entries that matched the search conditions are displayed.

• Clearing

1 To clear dynamic MAC address entries, click the [Clear] button.
2 The confirmation window is displayed.  Clicking the [OK] button clears the 

dynamic entries.

3 All dynamic entries are cleared, regardless of the search conditions.

Interface

Specify the interface (default: IO_Unit):

• IO_Unit (default): Specify an I/O unit (00 to 71).  Default: 00
• GigabitEthernet: Specify GigabitEthernet (0/1 to 0/8).
• 10GigabitEthernet: Specify 10GigabitEthernet (1/1 to 1/2).
• port-channel: Specify a port-channel (1 to 7).

VLAN ID

Specify a VLAN ID (1 to 4094).

MAC Address

Specify the station MAC address (0x00 to 0xFF).

Status

Specify the type of addresses to be displayed:

• Static (default): Displays static addresses only.
• Dynamic: Displays dynamic addresses only.

Chip Number

Specify a chip number (1 to 4).

Button

Description

Help

Displays the Help window.

Query

Displays search results after a search is completed.

Clear

Clears dynamic entries.  Static entries are not cleared.

Next

If number of entries to be displayed exceeds 1024, clicking this 
button displays the next 1024 entries.  The [Next] button is 
displayed only if there are still entries to be displayed after the 
[Query] button is clicked.

Cancel

Returns to the initial [MAC Address Table] window.  This button 
is displayed only after the [Query] button is clicked.

Item

Description