Epson EL 486UC 사용자 설명서

Make sure you have installed the drive correctly and check all

the cable connections.

You see a diskette drive error when you start your computer.

Run the SETUP program and configure your system for the

correct type of diskette drive.

The diskette drive is  making  loud or unusual noises.

Contact your service representative or Epson Direct.

Make sure you have installed the drive correctly and check all

cable connections. Also, check the jumper settings on your

drive.

You see a hard disk drive error when you start your system.

Run SETUP and update your system configuration for the hard

disk drive. Make sure you selected the correct drive type.

Make sure the jumpers on the system board are set correctly.

See Chapter 3 for jumper information.