Epson EL 486UC 사용자 설명서

Eight additional shadow options are available, allowing you to

shadow 16KB at the memory address listed on the screen. You

may want to enable one or more of these shadow options if you

are using option cards that contain ROM. Using these options,

you can shadow the memory on the card to your system’s RAM

or external cache (if one is installed). Check the documentation

that came with your option card to determine which addresses

your option card can access. You may also need to set some

switches or jumpers on your option card.

If you enable the 

option, you cannot

enable the last four of these 

options because they

access the same memory addresses.

When you leave the SETUP program, you can save your

settings and reboot your system, or exit SETUP without saving

your settings. You can also return all values to the factory

defaults.

To leave the SETUP program, press 

from any SETUP

screen. From the SETUP exit menu, press these keys to perform

the following functions:

Esc

F4

Returns to the SETUP utility

Saves the changes you have made to your

configuration and restarts your computer

F5

Supplies the factory default values for all SETUP

options

F6

Exits the SETUP utility and returns to the system

prompt without saving any changes.

1-20

Setting  Up Your System