Epson EL 486UC 사용자 설명서

Your computer may have a hard disk drive already installed in

the internal drive bay. If not, you can install a l-inch high by

3½ inch wide drive in this bay.

Here you will find steps for the following procedures:

Removing the mounting frames from the hard disk drive

(if necessary)

Connecting the hard disk drive cables

Installing the hard disk drive under the mounting bracket

Installing the hard disk drive above the mounting bracket

Be sure to check the jumper settings on the drive before you

install a hard disk drive. Also, you will need to know the

number of cylinders, heads, sectors, etc. to select the correct

drive type in the SETUP program. See the documentation

that came with your drive for this information.

Before you can install a hard disk drive, you need to remove

any option cards that may be blocking your access to the hard

disk drive area. Once you have installed the drive, replace any

option cards you removed. See Chapter 3 for instructions.