Epson EL 486UC 사용자 설명서

To connect the drive to the computer, you need to connect both

the drive ribbon cable and a power supply cable. Follow the

steps below.

1. If you are installing a diskette drive, locate the diskette drive

ribbon cable. (The connector in the middle of the cable is

already connected to the system board.)

If you are installing a second diskette drive or a tape drive

with a card-edge connector, one end of the cable is

connected to the bottom diskette drive. Use the other

connector on the ribbon cable to connect the drive to the

system board.

Make sure you align the key-way (the plastic divider) with

the gap in the drive connector, as shown below.

key-way