Epson Y16499100301 사용자 설명서
3.
Type:
DISKCOPY A: B:
and press
Enter.
The screen displays these prompts:
Insert
SOURCE
diskette in drive A:
Insert
TARGET
diskette in drive B:
Press any key when ready . . .
4. Drive A already contains the diskette you want to copy
(the source) and drive B contains the blank diskette (the
target), so just press any key. If the diskette in drive B is
not formatted, the DISKCOPY program formats it. Then
the program begins copying the data from drive A to the
formatted diskette in drive B.
target), so just press any key. If the diskette in drive B is
not formatted, the DISKCOPY program formats it. Then
the program begins copying the data from drive A to the
formatted diskette in drive B.
5. When the copy is complete, the screen displays this
prompt:
Copy
another diskette (Y/N)?
Press Y so you can make a copy of the reference diskette.
Remove the diskettes from drives A and B (press the release
button on each drive to remove the diskette). Then insert
Remove the diskettes from drives A and B (press the release
button on each drive to remove the diskette). Then insert
the reference diskette in drive A and another blank diskette
in drive B. Follow the prompts on the screen to copy the
reference diskette.
in drive B. Follow the prompts on the screen to copy the
reference diskette.
6. When you finish and the Copy
another diskette (Y/N)?
prompt displays, press
N
to return to the MS-DOS A>
prompt.
Copying with one diskette drive
1. If it is not already in the drive, insert your MS-DOS system
diskette in drive A (and press any key, if necessary). The
A> prompt should be on the screen.
A> prompt should be on the screen.
2.
Type:
DISKCOPY
and press
Enter.
The screen displays the following prompts:
1-20
Setting Up Your System