Samsung NP540U4EK01US 사용자 설명서
60
61
Chapter 3.
Using the computer
Multi Card Slot
(Optional)
1
Insert a memory card into the multi-card slot in the correct
direction.
2
The following message appears on the top right. Click to
open the folder and click View Files.
If a message appears to notify you of any problem, click the
corresponding window > Continue without Scanning. You
can perform the following process described in No. 3.
3
Windows Explorer runs on the Desktop. You can save, move
and delete data on the corresponding drive.
To remove a memory card
Remove the card while holding the tip of the card.
Alternatively, push the tip of the card in and then remove it once it
Alternatively, push the tip of the card in and then remove it once it
pops up.
To format a memory card
When using the memory card for the first time, you must format
the card before using it.
Formatting a card deletes all data saved on the card. If the
card includes data, backup the data before formatting it.
1
Click the Windows Explorer
icon in the taskbar on the
Desktop.
2
Right-click over a card drive with the touchpad and select
Format.
3
Click Start to the formatting.
To share a memory card with a digital device such as digital
•
camera, it is recommended to format the memory card
in the digital device before use. If you format a memory
card on the computer and then insert the memory into the
digital device, you may need to format the memory card
again in the digital device.
If there is a write-protection device in the memory card
If there is a write-protection device in the memory card
•
and the device is set to the lock position, you cannot
format, write data, nor erase data from the card.
Repeatedly inserting and removing a memory card may
Repeatedly inserting and removing a memory card may
•
damage the memory card.
SDIO (Secure Digital Input Output)
SDIO (Secure Digital Input Output)
•
is not supported.
You cannot read or write copyright-protected data.
•