Samsung NP540U4EK01US 사용자 설명서

  Select Save to save the changes.

  When the computer restarts automatically and the Samsung 

logo screen appears, press the F2 key repeatedly. 

  Select Security > TPM Configuration and set the TPM 

Device item to Enabled.
Set the TPM State to Enable & Activate.

TPM Device

TPM State

Security Chip State

Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.

Enabled

Enabled & Activate
Clear

Enabled & Activate

Deactivate & Disable

Clear

  Select Save to save the changes.

  The computer automatically restarts. Initialization of the TPM 

chip has been completed. Now, install the TPM program and 

register the TPM program.

You can install the TPM program as follows. Install the program 

according to the procedures below. 

This program is only provided for models with Recovery and 

the TPM function.

  Run Recovery and click on System Software.

-  If your computer does not boot up or if System Software 

does not display in the Recovery program, use Method 2 

to install the TPM program.

  Click on System Software Installation.

  The SW Update program will be launched.

Select TPM Host SW and click Install Now.

If the system software media is supplied with the product, 

you can install the program by using the system software 

media (only when supplied.)

  After the installation, if you click OK, the computer restarts.