Psion Teklogix 7530 G2 사용자 설명서

5.11.2.4 EAN 13

Enabled

Set this parameter to on to enable “EAN 13” or off to disable it.

Enable Bookland EAN

Setting this parameter to ON allows your scanner to recognize Bookland EAN 
bar codes.

Include Country

If this parameter is enabled, the country code is included with the decoded bar 
code data.

Include Check

If this parameter is enabled, the check digit is included with the decoded bar 
code data.

Addendum

An addendum is a separate bar code, supplementary to the main bar code. 
This parameter provides three options: 

Disabled, Optional 

and

 Required

. 

Depending on the value chosen for this parameter, an addendum is recognized 
or ignored.

•

Double-tap on Addendum to display a dialog box listing your options.

•

Highlight an item, and tap on OK.

When “Addendum” is set to

 

,

 the scanner does not recognize an 

addendum. If this parameter is set to

 

,

 the scanner searches for 

an addendum and if one exists, appends it to the main bar code. When the 
parameter is set to

 

,

 the scanner does not accept the main bar code 

without an addendum.

Note: Setting ‘Addendum’ to Optional reduces performance. Optional