Psion Teklogix 7530 G2 사용자 설명서

Check Digit Verification

Uses the specified algorithm of the option you've chosen to ensure the integrity of the 
symbol data before transmitting. If the data does not contain that algorithm, the data 
is not transmitted. The available options are: One Check Digit or Two Check Digits. 

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.

Minimum Length

Minimum lengths for the bar code can be set from 0 to 255. The length of a code 
refers to the number of characters (i.e., human readable characters), including 
check digit(s). 

Field Size/Chars

Refer to page 148 for details.

5.11.4.13 Interleaved 2 of 5

Enabled

Set this parameter to on to enable “Interleaved 2 of 5”.

Reading Range

Determines the reading distance from which a bar code can be successfully scanned. 
The default setting Extended, allows for increased reading distance. 

Check Digit Verification

Uses the specified algorithm of the option you've chosen to ensure the integrity of 
the symbol data before transmitting. If the data does not contain that algorithm, the 
data is not transmitted. The available options are: Disabled, MOD 10 Check, or 
French CIP. 

Transmit Check Digit

If the check digit is to be transmitted with the data, this parameter must be enabled.