Siemens programming the cpu 314c-2dp 사용자 설명서
Automation and Drives - SCE
T I A Training Document
Page 12 of 25
Module
The hardware configuration of the PLC is mapped in the 'SIMATIC 300 Station' and 'CPU' folders.
This is done in the special case where a configuration is created with the CPU 314C-2DP.
Also, a clock memory is configured and the addresses of the input and output modules are set in this
case.
This is done in the special case where a configuration is created with the CPU 314C-2DP.
Also, a clock memory is configured and the addresses of the input and output modules are set in this
case.
The user must perform the following steps in order to set up a project and create the hardware
configuration.
configuration.
1. The central tool in STEP 7 is the 'SIMATIC Manager', which is started by double-clicking on the
icon. (
→ SIMATIC Manager)
2. STEP 7 programs are managed in projects. Such a project will now be set up (
→ File → New)
Foreword Notes Hardware configuration STEP 7 program Testing
A5
Issue date: 02/2008 Programming the CPU 314C-2DP