Samsung N150BLACK 사용자 설명서
10
3
Enter a password, press <
Enter>, re-
enter the password for confirmation,
and press <
Enter> again.
The password can be up to 8
alphanumeric characters. Special
characters are not allowed.
4
When a message confirming the
password configuration appears in
the
Setup Notice window, press
<
Enter>.
The supervisor password has been
set.
The supervisor password is required
The supervisor password is required
to turn the computer on or to enter the
BIOS Setup.
Setting a User Password
The User Password restricts access
to the computer or for configuring the
BIOS Setup, like a Supervisor Password.
However, the Setup items that can
be configured with a User Password
are restricted, unlike for a Supervisor
Password.
Before configuring a user password, a
supervisor password must have been
configured. Deactivating the supervisor
password also deactivates the user
password.
In the
Set User Password item, press
<
Enter> and complete the procedures
from Step of Setting a Supervisor
Password.
Setting Up a Boot Password
To setup a boot password, the
administrator password (
Set Supervisor
Password) should be set in advance.
Set the
Password on boot item to
Enabled.
Once a boot password is set, you have
to enter the password to boot up the
computer.