Toshiba M100 사용자 설명서

Operating Basics

3. Plug the other end of the cable into a LAN hub connector. Check with 

your LAN administrator before connecting to a hub.

To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer's LAN jack and pull 

out the connector.

2. Disconnect the cable from the LAN hub in the same manner. Check with 

your LAN administrator before disconnecting from the hub.

The wireless LAN is compatible with other LAN systems that comply with 
the IEEE 802.11a/g wireless LAN standards.
It supports the following:

■

Automatic Transmit Rate Select mechanism in the transmit range of 54, 
11, 5.5, 2 and 1 Mbit/s.

■

Advanced Encryption Standard (AES) data encryption, based on 128bit 
encryption algorithm. (Revision G combo type.)

■

Frequency Channel Selection (2.4 GHz or 5 GHz)

■

Roaming over multiple channels

■

Card Power Management

■

Wired Equivalent Privacy (WEP) data encryption

It may not be possible to make a network connection to a specified network 
name using the ad hoc network function. If this occurs, the new network(*) 
will have to be configured for all computers connected to the same network 
in order to re-enable network connections.
* Please be sure to use new network name.

1. TOSHIBA strongly recommends that you enable the WEP encryption 

function otherwise your computer could be left open to illicit access via 
the wireless LAN connection which may result in an intrusion that can 
lead to the theft or loss of stored data among other things. In addition, 
the owner of an Internet connection is responsible for all browsing, 
downloading, and uploading activities on that connection. Therefore, an 
unsecured wireless network connected directly to the Internet is an open 
invitation for outsiders to abuse your ISP account and privileges.

2. TOSHIBA is not liable for the eavesdropping on your data due to the use 

of the wireless LAN connection and any damage that may occur thereof.