Texas Instruments 3000 WinSX 사용자 설명서
Other Options
External Monitor
The TravelMate 3000 WinSX supports the following multifrequency external and VGA
monitors.
monitors.
q
31 kHz/70 Hz (400/200 line mode)
q
60 Hz (480 line mode)
q
IBM PS/2 monitors
q
Multiscanning monitors covering 15.75 to 31.5 kHz, 50 to 70 Hz
You can connect an external VGA monitor to the 15-pin connector on the left side of the
TravelMate 3000 WinSX as follows.
TravelMate 3000 WinSX as follows.
Caution:
Always turn off the computer before connecting an external
monitor.
1.
Turn off power to both the external monitor and the TravelMate 3000
WinSX.
WinSX.
2.
Connect the 15-pin external VGA monitor cable from the external
monitor to the 15-pin connector on the left side panel of the computer.
monitor to the 15-pin connector on the left side panel of the computer.
3 .
Turn on power to the TravelMate 3000 WinSX first, then turn on the
external monitor.
external monitor.
4 .
Switch the display between the TravelMate 3000 WinSX's LCD and the
external monitor by double clicking the Windows Notebook group menu
Altvid icon. Or at the MS-DOS C:\> prompt type
external monitor by double clicking the Windows Notebook group menu
Altvid icon. Or at the MS-DOS C:\> prompt type
ALTVID
and press the Enter key to switch the display between the units.
TravelMate 3000 WinSX Options 6-17