Texas Instruments 660 사용자 설명서

                                                                                        Operating Instructions   3-3

Table 3-2 contains a summary of keyboard hot key sequences useful when performing 
maintenance operations.

Num Lock Indicator
Lights when the embedded numeric keypad is toggled ON using the 
Num Lock hot key (Fn+F7). Refer to 

Using the Internal Numeric 

Keypad section for further details.

Suspend Mode Indicator
Lights when the computer is in Suspend mode. Flashes when the 
computer is in the 5V Suspend mode.
The computer enters the 5V Suspend mode when you press the 5V 
Suspend hot key (Fn+F3), the 5 Volt Suspend Timeout parameter in 
Setup is enabled and expires, or the display is closed.

Standby Mode Indicator
Lights when the computer is in the Standby mode.
The computer enters the Standby mode if the Standby hot key 
(Fn+F3) is pressed or the Standby Timeout parameter in Setup is 
enabled and expires.

CMOS Setup

Enter 0V Suspend Mode

5 Volt Suspend

Enter Standby Mode

Resume from Standby Mode

Press any key

Scroll Lock

Numeric Lock 

Turn off the LCD backlight

Turn on the LCD backlight

Press any key

Alternate between display modes (LCD, Ext.l CRT or both)

Decrease LCD screen brightness

Increase LCD screen brightness 

Lighten LCD screen contrast

Darken the LCD screen contrast

Exit 0V Suspend Mode

Press Power switch