Texas Instruments 1 사용자 설명서
POST BIOS
C-3
; Display prompt "Press F2 to enter SETUP"
;----------------------------------------------------------------------------
04BH quiet Boot Start, OPTIONAL, FAR
04EH post Copyright Display, FAR
050H
;----------------------------------------------------------------------------
04BH quiet Boot Start, OPTIONAL, FAR
04EH post Copyright Display, FAR
050H
cpu Display, FAR
051H
eisa Init, OPTIONAL
05AH post Display F2 Message, FAR
;----------------------------------------------------------------------------
; Disable the CPU cache
; Size and test the system memory
; Size and test the extended memory
; Test extended memory address lines
; User hook # 1
;----------------------------------------------------------------------------
05BH cpu Cache Off
05CH post Memory Test, FAR
060H
; Disable the CPU cache
; Size and test the system memory
; Size and test the extended memory
; Test extended memory address lines
; User hook # 1
;----------------------------------------------------------------------------
05BH cpu Cache Off
05CH post Memory Test, FAR
060H
post Extended Memory Test, FAR
062H
post Extended Address Test, FAR
064H
user Patch1
;----------------------------------------------------------------------------
; Enable and configure the cache
; Display the cache size if a cache was detected and enabled.
; Display size of shadow RAM, size of non-disposable BIOS
;----------------------------------------------------------------------------
066H
; Enable and configure the cache
; Display the cache size if a cache was detected and enabled.
; Display size of shadow RAM, size of non-disposable BIOS
;----------------------------------------------------------------------------
066H
cache Adv Config
068H
cache Configure
06AH post Display Cache Size, FAR
06CH post Display Shadows, FAR
06EH post Display Non Disposable, FAR
06CH post Display Shadows, FAR
06EH post Display Non Disposable, FAR
;----------------------------------------------------------------------------
; Display any POST errors
; Check for configuration errors
; Test Real Time Clock
; Check for keyboard errors
;----------------------------------------------------------------------------
070H
; Display any POST errors
; Check for configuration errors
; Test Real Time Clock
; Check for keyboard errors
;----------------------------------------------------------------------------
070H
post Display Error Messages, FAR
072H
post Test Config, FAR
074H
post RTC Test, FAR
;----------------------------------------------------------------------------
; Set up hardware interrupt vectors
; Test coprocessor if present
; Return to standard real mode
;----------------------------------------------------------------------------
07CH post Setup Hardware Vectors, FAR
07EH cpu Coprocessor Test, FAR
096H
; Set up hardware interrupt vectors
; Test coprocessor if present
; Return to standard real mode
;----------------------------------------------------------------------------
07CH post Setup Hardware Vectors, FAR
07EH cpu Coprocessor Test, FAR
096H
post Clear Huge ES
;----------------------------------------------------------------------------
; Disable programmable I/O devices
; Detect and install fixed RS232 ports
; Detect and install fixed parallel ports
; Init PC-compatible PNP & PCI devices (COM, LPT, floppy, etc.)
; Re-enable programmable I/O and check for conflicts with fixed I/O
;----------------------------------------------------------------------------
post Shutdown Eight Table LABEL post Proc
; Disable programmable I/O devices
; Detect and install fixed RS232 ports
; Detect and install fixed parallel ports
; Init PC-compatible PNP & PCI devices (COM, LPT, floppy, etc.)
; Re-enable programmable I/O and check for conflicts with fixed I/O
;----------------------------------------------------------------------------
post Shutdown Eight Table LABEL post Proc