Sony PCG-954A 매뉴얼
VAIO Notebook User Guide
118
My notebook does not enter the power saving mode I selected. (Windows Me
only)
only)
❑
Click Start, point to Program, point to Accessories, point to System Tools,
and then click System Information.
and then click System Information.
The Help and Support window appears.
❑
Click System Configuration Utility under the Tools menu.
❑
Click the Advanced button on the General tab, and Confirm the following
information:
information:
1
Enable Deep Sleep is selected with a checkmark.
2
The message “Standby function is enabled” is displayed. If the message
reads “Standby function is disabled”, click the Enable button.
reads “Standby function is disabled”, click the Enable button.
3
The message “Hibernate feature is enabled” is displayed. If the message
reads “Hibernate feature is disabled”, click the Enable button.
reads “Hibernate feature is disabled”, click the Enable button.
4
Click OK and restart your notebook.
My system enters System Idle mode when System Suspend mode has been
selected
selected
If you are connecting an optical disc drive with a PC card, disconnect it by
stopping the PC card. See “To remove a PC card”. Make sure the PC card is
compatible with your notebook’s Windows® operating system.
stopping the PC card. See “To remove a PC card”. Make sure the PC card is
compatible with your notebook’s Windows® operating system.
The Power Management setting is not responding
Your notebook’s operating system may become unstable if a lower power state,
such as system hibernate is initiated and then changed before the notebook
completely enters the lower power state. To restore the notebook to its normal
operating stability:
such as system hibernate is initiated and then changed before the notebook
completely enters the lower power state. To restore the notebook to its normal
operating stability:
❑
Close all open applications.
✍
Pressing Ctrl+Alt+Delete (at the same time) or turning off the notebook with the power
switch may result in data loss in files that are currently open.
switch may result in data loss in files that are currently open.
✍
(Windows 2000 only) When the notebook returns from a power saving mode after
removing the optical drive, the message "Unsafe Removal of Device" may appear and
the device name may be displayed as "Secondary IDE Channel”. Click OK.
removing the optical drive, the message "Unsafe Removal of Device" may appear and
the device name may be displayed as "Secondary IDE Channel”. Click OK.