StarTech.com CABCONS1716I 사용자 설명서
Instruction Manual
37
Manual Scan: Scans through powered computers using keyboard control. Scan Type
(<F4>: More\Scan Type) determines if scanned computers must also be eye mark
selected. Press the up arrow key to select the previous computer and the down arrow
key to select the next computer. Press any other key to abort the Manual Scan mode.
Audio Stick: A multimedia module can be LINKed to the back of each KVM for
Audio Stick: A multimedia module can be LINKed to the back of each KVM for
selecting microphone and stereo speaker signals.
There are two options for Audio Stick: On and Off. When set to On, audio selection
There are two options for Audio Stick: On and Off. When set to On, audio selection
follows computer selection. When set to Off, audio selection stops following computer
selection. Off mode is useful if you want to listen to a particular computer’s audio
signal while operating other computers. The non-volatile memory stores the Audio
Stick setting.
NOTE: This is an optional feature requiring that a separate device be connected to the
NOTE: This is an optional feature requiring that a separate device be connected to the
master switch.
Scan Type:
Ready PC + Eye: In Scan mode, scans through only powered
computers that are eyemarked selected.
Ready PC: In Scan mode, scans through all powered computers. The non-volatile
Ready PC: In Scan mode, scans through all powered computers. The non-volatile
memory stores the Scan Type setting.
Scan Rate: Sets the duration of a computer displayed in Auto Scan mode. The options
are 3 seconds, 8 seconds, 15 seconds and 30 seconds. The Scan Rate setting is stored in
non-volatile memory.