Intel 317443-001US 사용자 설명서

Intel

®

 Core

TM

 2 Duo processor with the Mobile Intel

®

 945GME Express Chipset

Manual

May 2007

28

 

Order Number: 317443-001US

In addition to the internal I/O connections listed above, the evaluation board also 

contains the following I/O on the rear panel (as illustrated in 

).

• Five USB ports on back panel.
• VGA connector
• PS/2-style keyboard and mouse ports
• LAN  connector
• One 9-pin serial connector
• One  IrDA  port
• One TV D-connector

The evaluation board provides access to one x16 PCI Express* connector. Any industry 

standard x16 PCI Express* video adapter may be used with this interface. The 

evaluation board also provides access to two x1 PCI Express* connectors. Any industry 

standard x1 PCI Express* adapter may be used with these interfaces.

The evaluation board provides support for up to two SATA disk drives. The SATA 

controllers are software compatible with IDE interfaces, while providing lower pin 

counts and higher performance.

These are two SATA connectors on the evaluation board. The SATA Cable connect 

provides both signalling and power white the SATA Direct connect only provides signals 

(the user typically uses an ATX power supply for the drive power). 

The evaluation board has a 40-pin connector for the ICH7-M’s integrated IDE controller. 

This connector supports up to two Ultra ATA/100 hard drives; one master and one 

slave.

Desktop hard drives must be powered by an external ATX power supply.

The evaluation board provides five USB (2.0) ports on the rear panel and three 

additional ports through headers (J6H2 and J7E2).

There are four UHCI Host Controllers and an EHCI Host Controller. Each UHCI Host 

Controller includes a root hub with two separate USB ports each, for a total of eight 

legacy USB ports.

The EHCI Host Controller includes a root hub that supports up to eight USB 2.0 ports. 

The connection to either the UHCI or EHCI controllers is dynamic and dependant on the 

particular USB device. As such, all ports support High Speed, Full Speed, and Low 

Speed (HS/FS/LS).

A standard 15 pin D-Sub connector on the rear panel provides access to the analog 

output of the Intel

®

 945GME Express Chipset. The integrated graphics supports a 

maximum resolution of 2048 x 1536 @ 75Hz. This can be connected to any capable 

analog CRT or flat panel display with analog input.