JVC Kaboom Box RV-NB 1 RV-NB1 사용자 설명서

제품 코드

RV-NB1

■■

Listening to an auxiliary equipment

You can listen to an auxiliary equipment.
• First make sure that the auxiliary equipment is properly

connected to the system. (See page 5.)

■

1. Set the volume level to minimum.

■

2. Press AUX.

“AUX” appears on the display.

• To listen to the auxiliary equipment, start playing the auxiliary

equipment.

■

3. Adjust the volume to the desired listening

level.

■

4. Apply sound effects, if you wish.

■

Adjust the super woofer volume to reinforce the bass sound.

Note: For operation of the auxiliary equipment, refer to its

instructions.

■■

Using the microphone/guitar

Using a microphone or a guitar (not supplied), you can mix its
sound with a source sound.

■

1. Make sure the MIC/GUITAR LEVEL control

on the rear of the system is properly set.
• When using a microphone, make sure the knob is pressed in

(

• When using a guitar, make sure the knob is released (

—).

■

2. Set the MIC/GUITAR LEVEL control to MIN

by turning it fully counterclockwise.

■

3. Connect a microphone or a guitar into the

MIC/GUITAR INPUT jack on the rear of the
system.

■

4. Start a source: disc, tape, tuner, or other

equipment.

■

5. Adjust the VOLUME +/– control and the

MIC/GUITAR LEVEL control, as you play the
microphone or the guitar.

CAUTION: DO NOT connect a bass guitar to the
MIC/GUITAR INPUT jack, as it may damage the
system.

■

1. Follow the above steps

–

■

2. To record, follow the steps in “Standard

recording”. (See page 14.)

Note: If “howling” occurs when using the microphone, keep the

microphone away from the speaker.

AUX

Listening to external equipment

Microphone/guitar mixing

Recording microphone or
guitar mixing on a tape

RV-NB1[B]f.book Page 16 Friday, July 16, 2004 5:42 PM