Apple 073-0711 사용자 설명서

 

Xserve Logic Board with Processor/Heatsink - 

 

1.

Release the locking latch on the power supply cable connector and disconnect the 

cable from the drive interconnect board. 

 

2.

Release the thumbscrew that secures the power supply to the chassis.

 

 The thumbscrew is captive; you cannot remove it.

3.

Grasp the metal flange of the power supply’s connector (on the left side) and lift up to 

disconnect the power supply from the logic board. 

 

 You may need to loosen the left side of the power supply and then lift at 

another point near the front to disengage it. Do not lift the small lip that contains the 

thumbscrew.

4.

Holding the power supply in both hands, remove it from the server.