Avaya EU24 사용자 설명서

Page 40 - Function Key Programming 

Function Keys 

Page 40 - Function Keys 

IP Office 2420 + EU24 User’s Guide  

Function Key Programming 

40DHB0002UKEG – Issue 4 (9th February 2004) 

Sets the extension's membership of a group or groups as enabled. This function does 
not take the Hunt Group In/Out of Service.  
This function can be programmed with or without a target group number. This function 
cannot be programmed through the phone by the user.  
If programmed without a group number, pressing 

 HGEna toggles all the extension's 

group memberships to either enabled or disabled. A   is shown next to 

 HGEna 

when the group memberships are enabled.  
If programmed with a group number, that number is shown next to 

 HGEna. 

Pressing 

 HGEna will enable the extension's membership of that group. In this 

mode the key does not toggle.  
When enabled, G is shown on the display and the extension will receive group calls.  
 

[User | Digital Telephony | Advanced | Hunt Group | Hunt Group Enable]  

See also:  

• 

HGNS+ - Set Hunt Group Night Service (!) on page 42.

 

• 

HGOS+ - Set Hunt Group Out of Service on page 43.

 

•  HGDis - Hunt Group Disable on page 42. 

 

Sets the extension's group membership as disabled. Used with HGEna - Hunt Group 
Enable on page 42. This function does not take the Hunt Group Out of Service. 
This function can be programmed with or without a target group number. This function 
cannot be programmed through the phone by the user.  
If programmed without a group number, pressing 

 HGDis disables all the 

extension's group memberships.  
If programmed with a group number, pressing 

 HGDis disables just the extension's 

membership of that group. 
 

[User | Digital Telephony | Advanced | Hunt Group | Hunt Group 

Disable] 

  

Put a specific hunt group into or out of night service mode.  
This function requires the hunt group number to be entered when programmed. The 
hunt group number is then shown next to HGNS+. This function can be programmed 
through the phone by the user using an 

 Admin key.  

Pressing 

 HGNS+ puts the hunt group into night service. Group calls then go to its 

night service fallback group if set or, if not answered, to voicemail.  
 

[User | Digital Telephony | Advanced | Set | Set Hunt Group In 

Service] 

  

Returns a hunt group that has been manually put into night service back to normal 
service. Used with HGNS+ - Set Hunt Group Night Service (!) on page 42. 
This function requires that the hunt group number is entered when programmed. This 
function cannot be programmed through the phone by the user.  
The hunt group number is shown next HGNS-. Pressing 

 HGNS- puts the group 

back into normal service if in night service.  
 

[User | Digital Telephony | Advanced | Call | Clear Hunt Group Night 

Service]