Avaya Wireless AP-3 사용자 설명서

4-14                                                                                  Avaya Wireless AP-3 User’s Guide

You can configure and view the following parameters within the DHCP 
Server Configuration screen:

Enable DHCP 
Server

 Place a check mark in the box provided to 
enable DHCP Server functionality. 

NOTE:
You cannot enable the DHCP Server 
functionality unless there is at least one 
IP Pool Table Entry configured.

Subnet Mask

This field is read-only and reports the 
Access Point’s current subnet mask. DHCP 
clients that receive dynamic addresses from 
the AP will be assigned this same subnet 
mask.

Gateway IP 
Address

The AP will assign the specified address to its 
DHCP clients.

Primary DNS IP 
Address

The AP will assign the specified address to its 
DHCP clients.

Secondary DNS IP 
Address

The AP will assign the specified address to its 
DHCP clients.

Number of IP Pool 
Table Entries

This is a read-only field that reports the 
number of IP address pools currently 
configured.