Avaya Wireless AP-3 사용자 설명서

7-20                                                                                  Avaya Wireless AP-3 User’s Guide

3. Follow one of the procedures below to load a new AP Image to the 

Access Point:

— Download a New Image Using the Bootloader CLI

To download the AP Image, you will need an Ethernet connection to the 
computer on which the TFTP server resides and to a computer that is 
running ScanTool (this is either two separate computers connected to the 
same network or a single computer running both programs).

ScanTool detects if an Access Point does not have a valid software 
image installed. In this case, the TFTP Server and Image File Name 
parameters are enabled in the ScanTool’s Change screen so you can 
download a new image to the unit. (These fields are grayed out if 
ScanTool does not detect a software image problem.) 

Before starting, you need to know the Access Point’s IP address, subnet 
mask, the TFTP Server IP Address, and the AP Image file name. Make 
sure the TFTP server is running and configured to point to the folder 
containing the image to be downloaded.