Cisco Systems SLM224G4PS 사용자 설명서

The RMON Events screen is used to define RMON events. 

Statistics > RMON Events

Displays the event.

Displays the community to which the event 

belongs.

Displays the user-defined event description.

Describes the event type. Possible values are:

Indicates that no event occurred.

Indicates  that  the  event  is  a  log  entry.•Trap. 

Indicates that the event is a trap.

Indicates that the event is both a log 

entry and a trap.

Displays  the  device  or  user  that  defined  the 

event.
Click Add to List to add the configured RMON event to 

the Event Table at the bottom of the screen.

The Event Table lists all events defined using the Add Event 

fields. The  Event Table  contains  columns  for  all  the  Add 

Event fields, plus the following additional column:

Displays the time that the event occurred.

The Port Utilization screen displays the amount of resources 

each interface is currently consuming. Ports in green are 

functioning  normally,  while  ports  in  red  are  currently 

transmitting an excessive amount of network traffic.

•

•

•

 

Statistics > Port Utilization

The number of the unit that you are managing.

Select  the  rate  at  which  to  refresh  the 

statistics display: No Refresh (default), 15 sec, 30 sec, or 

60 sec.

Statistics > Interface Statistics

The Interface Statistics screen is used to display statistics 

for the Ethernet port or LAG that you specify. You can also 

specify the rate at which the display will be refreshed.

To display statistics for an Ethernet port, select 

Unit  No.,  then  select  the  desired  unit  and  port  from  the 

drop-down menus. To display statistics for a LAG, select LAG, 

then select the desired LAG from the drop-down menu. 

Select  the  rate  at  which  to  refresh  the 

display: 15 sec, 30 sec, 60 sec, or No Refresh (default).

This section displays statistics for the packets transmitted 

and received on the selected interface.

Statistics on received packets

Displays  the  number  of  octets 

received on the selected interface.

•