Harwa LCD 15'' H 3S LC15H3 사용자 설명서
제품 코드
LC15H3
Preparations
(continued)
Power connection
1. Connecting the female plug to the AC socket on AC adapter.
2. Connecting the AC adapter to the DC power input of the set.
3. Connecting the male plug to the wall outlet as illustrated.
2. Connecting the AC adapter to the DC power input of the set.
3. Connecting the male plug to the wall outlet as illustrated.
Note:
Plug into AC outlet.
Household
power outlet
power outlet
AC cord
AC adapter
Connect to the DC input
socket of the product.
Be sure to insert plug into
the end fully and confirm
it is reliable
socket of the product.
Be sure to insert plug into
the end fully and confirm
it is reliable
Antenna Connection
75-ohm coaxial cable (round cable)
300-ohm twin-lead flat feeder
To antenna
input terminal
(
input terminal
(
)
INSTALL the unit in a room where direct light will not fall upon
the screen. Total darkness or a reflection on the picture screen
may cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
the screen. Total darkness or a reflection on the picture screen
may cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
Optimum reception of color requires a good signal and will
generally mean that an outdoor aerial must be used. The exact
type and position of the aerial will depend upon your particular
area.
generally mean that an outdoor aerial must be used. The exact
type and position of the aerial will depend upon your particular
area.
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio
wave conditions.
The aerial cable should not be bundled with the power cord and the like.
wave conditions.
The aerial cable should not be bundled with the power cord and the like.
Note:
<
<
<
This product should be operated only from the type of power source indicated on the marking label.
<
Always unplug the AC adapter from the product and power outlet when not using for a long period of time.
Always turn the Power Switch of the LCD TV set to OFF when connecting the AC adapter.
4