Cisco Systems 3515 MCU12 사용자 설명서
2-3
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU Release 5.6
OL-17012-01
Chapter 2 Setting Up Your Cisco Unified Videoconferencing 3515 MCU
Mounting the Cisco Unified Videoconferencing 3515 MCU Unit in a 19-inch Rack
Mounting the Cisco Unified Videoconferencing 3515 MCU Unit
in a 19-inch Rack
in a 19-inch Rack
You can optionally mount the Cisco Unified Videoconferencing 3515 MCU unit in a standard 19-inch
rack. Two mounting brackets and a set of screws are included in the Cisco Unified
Videoconferencing 3515 MCU unit shipping box.
rack. Two mounting brackets and a set of screws are included in the Cisco Unified
Videoconferencing 3515 MCU unit shipping box.
Before You Begin
The requirements are as follows:
•
Proper clearance at the sides of the unit to allow adequate ventilation, and at least 20 cm clearance
at the back of the unit to allow access to cable connections
at the back of the unit to allow access to cable connections
•
Available IP network ports on the switch for the Cisco Unified Videoconferencing 3515 MCU unit
•
A grounded AC power outlet
•
A 10BaseT or 100BaseT LAN cable
•
Ambient room temperature range of 32
o
to 104
o
F (0
o
to 40
o
C)
•
Non-condensing relative humidity range of 5% to 90%
Procedure
Step 1
Disconnect all cables including the power cables.
Step 2
Place the Cisco Unified Videoconferencing 3515 MCU unit right-side up on a hard flat surface with the
front panel facing you.
front panel facing you.
Step 3
Position a mounting bracket over the mounting holes on each side of the Cisco Unified
Videoconferencing 3515 MCU unit, as shown in
Videoconferencing 3515 MCU unit, as shown in
Table 2-2
Package Contents with Cisco Unified Videoconferencing 3515 MCU12
or
Cisco Unified Videoconferencing 3515 MCU24
Unit
Product
Contents
Cisco Unified
Videoconferencing 3515
MCU unit
Videoconferencing 3515
MCU unit
•
Cisco Unified Videoconferencing 3515 MCU12 or Cisco Unified
Videoconferencing 3515 MCU24 unit
Videoconferencing 3515 MCU24 unit
•
Power cable (depending on customer location)
•
Terminal cable
•
2 LAN cables (one for the MCU, one for the video processing
module)
module)
•
Rack mounting kit (two brackets and six screws)
•
Four rubber feet
•
Guide to Cisco Conferencing Documentation
•
Regulatory Compliance and Safety Information for Cisco Unified
Videoconferencing 3500 Products
Videoconferencing 3500 Products
•
Cisco Unified Videoconferencing Software CD-ROM
•
Cisco Information Package