Cisco Systems 57712 사용자 설명서

Purpose

Command or Action

Commits the transaction to the system configuration.

Server /chassis/adapter/host-fc-if #
commit

Step 48

The changes will take effect upon the next
server reboot.

Note

This example configures the properties of a vHBA:

Server#

scope chassis

Server /chassis #

show adapter

PCI Slot Product Name

Serial Number

Product ID

Vendor

-------- -------------- -------------- -------------- --------------------
1

UCS VIC P81E

QCI1417A0QK

N2XX-ACPCI01

Cisco Systems Inc

Server /chassis #

scope adapter 1

Server /chassis/adapter #

scope host-fc-if fc1

Server /chassis/adapter/host-fc-if #

set boot enable

Server /chassis/adapter/host-fc-if *#

scope scsi-io

Server /chassis/adapter/host-fc-if/scsi-io *#

set cdb-wq-count 2

Server /chassis/adapter/host-fc-if/scsi-io *#

exit

Server /chassis/adapter/host-fc-if *#

commit

Server /chassis/adapter/host-fc-if #

What to Do Next

Reboot the server to apply the changes.

Creating a vHBA

The adapter provides two permanent vHBAs. If NIV mode is enabled, you can create up to 16 additional
vHBAs.

Before You Begin

You must log in with user or admin privileges to perform this task.

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters the command mode for the adapter card at the PCI
slot number specified by index.

Server /chassis # scope adapter
index

Step 2

The server must be powered on before you can
view or change adapter settings.

Note

Creates a vHBA and enters the host Fibre Channel
interface command mode. The name argument can be up
to 32 ASCII characters.

Server /chassis/adapter # create
host-fc-if name

Step 3

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01

Managing Network Adapters

Creating a vHBA