Cisco Systems 57712 사용자 설명서
Enabling Persistent Binding
Procedure
Purpose
Command or Action
Enters the chassis command mode.
Server# scope chassis
Step 1
Enters the command mode for the adapter card at
the PCI slot number specified by index.
the PCI slot number specified by index.
Server /chassis # scope adapter index
Step 2
The server must be powered on before you
can view or change adapter settings.
can view or change adapter settings.
Note
Enters the host Fibre Channel interface command
mode for the specified vHBA.
mode for the specified vHBA.
Server /chassis/adapter # scope host-fc-if
{fc0 | fc1 | name}
{fc0 | fc1 | name}
Step 3
Enters the persistent binding command mode for
the vHBA.
the vHBA.
Server /chassis/adapter/host-fc-if # scope
perbi
perbi
Step 4
Enables persistent binding for the vHBA.
Server /chassis/adapter/host-fc-if/perbi #
set persistent-lun-binding enable
set persistent-lun-binding enable
Step 5
Commits the transaction to the system
configuration.
configuration.
Server /chassis/adapter/host-fc-if/perbi #
commit
commit
Step 6
This example enables persistent binding for a vHBA:
Server#
scope chassis
Server /chassis #
scope adapter 4
Server /chassis/adapter #
scope host-fc-if fc1
Server /chassis/adapter/host-fc-if #
scope perbi
Server /chassis/adapter/host-fc-if/perbi #
set persistent-lun-binding enable
Server /chassis/adapter/host-fc-if/perbi *#
commit
Server /chassis/adapter/host-fc-if/perbi #
Disabling Persistent Binding
Procedure
Purpose
Command or Action
Enters the chassis command mode.
Server# scope chassis
Step 1
Enters the command mode for the adapter card at
the PCI slot number specified by index.
the PCI slot number specified by index.
Server /chassis # scope adapter index
Step 2
The server must be powered on before you
can view or change adapter settings.
can view or change adapter settings.
Note
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
97
Managing Network Adapters
Enabling Persistent Binding