Cisco Systems 57712 사용자 설명서

Set as Boot Drive

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters command mode for an installed storage
card.

Server /chassis # scope storageadapter slot

Step 2

Enters command mode for the specified virtual
drive.

Server /chassis/storageadapter # scope
virtual-drive drive-number

Step 3

Specifies the controller to boot from this
virtual drive.

Server /chassis/storageadapter #
set-boot-drive

Step 4

This example shows how to specify the controller to boot from virtual drive 3:

Server#

scope chassis

Server /chassis #

scope storageadapter SLOT-3

Server /chassis/storageadapter #

scope virtual-drive 3

Server /chassis/storageadapter/virtual-drive #

set-boot-drive

Are you sure you want to set virtual drive 3 as the boot drive?
Enter 'yes' to confirm ->

yes

Server /chassis/storageadapter/virtual-drive #

Modifying Attributes of a Virtual Drive

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters command mode for an installed
storage card.

Server /chassis # scope storageadapter slot

Step 2

Enters the command mode for the virtual
drive.

Server /chassis/storageadapter # scope
virtual-drive 3

Step 3

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

120

OL-28893-01

Managing Network Adapters

Set as Boot Drive