Cisco Systems 57712 사용자 설명서

Undo Preparing a Drive for Removal

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters command mode for an installed
storage card.

Server /chassis # scope storageadapter slot

Step 2

Enters command mode for the specified
physical drive.

Server /chassis/storageadapter # scope
physical-drive drive-number

Step 3

Server /chassis/storageadapter/physical-drive #
undo-prepare-for-removal

Step 4

This example shows how to respin physical drive 3 after preparing the drive for removal.

Server#

scope chassis

Server /chassis #

scope storageadapter SLOT-3

Server /chassis/storageadapter #

scope physical-drive 3

Server /chassis/storageadapter/physical-drive #

undo-prepare-for-removal

Server /chassis/storageadapter/physical-drive #

Enabling Auto Learn Cycles for the Battery Backup Unit

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters command mode for an installed storage
card.

Server /chassis # scope storageadapter slot

Step 2

Enter the battery backup unit command mode.

Server /chassis/storageadapter # scope bbu

Step 3

Enables the battery auto-learn cycles

Server /chassis/storageadapter #
enable-auto-learn

Step 4

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

124

OL-28893-01

Managing Network Adapters

Undo Preparing a Drive for Removal