Cisco Systems 57712 사용자 설명서

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters the command mode for the adapter card at the PCI
slot number specified by index.

Server /chassis # scope adapter
index

Step 2

The server must be powered on before you can view
or change adapter settings.

Note

Starts the export operation. The adapter configuration file
will be stored at the specified path and filename on the remote

Server /chassis/adapter #
export-vnic protocol remote
server IP address

Step 3

server at the specified IP address. The protocol can be one
of the following:

• TFTP

• FTP

• SFTP

• SCP

• HTTP

This example exports the configuration of adapter 1:

Server#

scope chassis

Server /chassis #

scope adapter 1

Server /chassis/adapter #

export-vnic ftp 192.0.20.34 //test/dnld-ucs-k9-bundle.1.0.2h.bin

Server /chassis/adapter #

Importing the Adapter Configuration

If any firmware or BIOS updates are in progress, do not import the adapter configuration until those tasks
are complete.

Important

Before You Begin

You must log in with admin privileges to perform this task.