Cisco Systems 57712 사용자 설명서
Server /chassis/flexflash/operational-profile #
set write-error-count-threshold 100
Server /chassis/flexflash/operational-profile *#
set raid-primary-member slot1
Server /chassis/flexflash/operational-profile #
set raid-secondary-role active
Server /chassis/flexflash/operational-profile *#
set virtual-drives-enabled "SCU HUU"
Server /chassis/flexflash/operational-profile *#
commit
Server /chassis/flexflash/operational-profile #
Booting from the Flexible Flash
You can specify a bootable virtual drive on the Cisco Flexible Flash card that will override the default boot
priority the next time the server is restarted, regardless of the default boot order defined for the server. The
specified boot device is used only once. After the server has rebooted, this setting is ignored.
priority the next time the server is restarted, regardless of the default boot order defined for the server. The
specified boot device is used only once. After the server has rebooted, this setting is ignored.
Before you reboot the server, ensure that the virtual drive you select is enabled on the Cisco Flexible Flash
card.
card.
Note
Before You Begin
• You must log in with admin privileges to perform this task.
• Cisco Flexible Flash must be supported by your platform.
Procedure
Purpose
Command or Action
Enters the BIOS command mode.
Server# scope bios
Step 1
The virtual drive from which the server attempts to boot the
next time it is restarted. This can be one of the following:
next time it is restarted. This can be one of the following:
Server /bios # set boot-override
{None | SCU | HV | HUU}
{None | SCU | HV | HUU}
Step 2
• None—The server uses the default boot order
• SCU—The server boots from the Cisco UCS Server
Configuration Utility
• HV—The server boots from the hypervisor virtual drive
• HUU—The server boots from the Cisco Host Upgrade
Utility
Commits the transaction to the system configuration.
Server /bios # commit
Step 3
This example specifies that the server boots from the Cisco UCS Server Configuration Utility the next time
it is restarted:
it is restarted:
Server#
scope bios
Server /bios #
set boot-override SCU
Committing the boot override BIOS will try boot to
the specified boot device first. Failure to detect
the boot device BIOS will boot from the list
configured in the BIOS boot order.
the specified boot device first. Failure to detect
the boot device BIOS will boot from the list
configured in the BIOS boot order.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
27
Managing the Server
Booting from the Flexible Flash