Canon AXIS 1650 사용자 설명서

50

AXIS 1650 User’s Manual

anticipates that there is a router available that automatically senses and 

redirects the print server's packets to destinations outside the local 

network segment. 

DHCP Enabled

Set to Yes to enable DHCP (Dynamic Host Configuration Protocol). DHCP 

automatically downloads the IP address to each print server at startup. 

Depending on how your network has been configured, other Internet 

related parameters (such as the default router, subnet mask, etc.) might 

also be set automatically. It is recommended that you verify the settings 

when the server has been restarted and then enter any missing parameters 

manually. 

BOOTP Enabled

Set to Yes to enable BOOTP (BOOTstrap Protocol). BOOTP downloads the 

IP address to each print server at startup. Depending on how your 

network has been configured, other Internet related parameters (such as 

the default router, subnet mask, etc.) might also be set automatically. 

However, we recommend that you verify the settings when the server has 

been restarted and then enter any missing parameters manually. 

RARP Enabled

Set to Yes to enable RARP (Reverse Address Resolution Protocol). RARP 

downloads the IP address to each print server at startup. This method only 

operates over single network segments. Other Internet related parameters 

(such as the default router, subnet mask, etc.) must be entered manually 

as RARP only sets the IP address. 

DNS Server Address

Specify the IP address of the DNS (Domain Name Server). DNS uses 

NetBIOS names to allow clients to locate resources on TCP/IP networks. 

DNS Dynamic Update

Select Yes to enable DNS (Domain Name Server). DNS uses NetBIOS 

names to allow clients to locate resources on TCP/IP networks. 

DNS Host name

Specify DNS Host name. This name will be used in all environments as 

the identifier of this print server. 

DNS Domain Name

Specify the name of the domain to which the print server belongs. 

Domain refers to a set of computers on a network that have been assigned 

a common name. A domain might contain several workgroups. 

WINS Enabled

Select Yes to enable WINS (Windows Internet Name Service) over TCP/IP. 

WINS uses NetBIOS names to allow Windows based clients to locate 

resources on TCP/IP networks. 

Default value = Yes 

WINS Server Address

Specify the IP address of the primary WINS server. The WINS server is 

used for identifying a computers by its host name instead of by its IP 

address.

WINS Host Name

Specify the WINS host name, which will be used as the identifier of your