Datalogic Scanning Matrix-2000 사용자 설명서

Matrix-2000™ Reference Manual 

 

 
In some direct part marking applications best reading results are obtained by using an 
external lighting system. A series of accessory illuminators are available which cover a 
variety of applications. 
 
 
The LT-100 Cone Lighting System provides a circular symmetrical light source designed for 
the following applications: 

• 

with uneven or noisy background surfaces 

• 

where dot peening or laser etching codes are directly marked onto metal surfaces or 
PCBs and need to be highlighted 

• 

in the presence of highly reflective surfaces (metal, glass, etc.) causing direct reflections 

 

 

 
 
 
The LT-200 Spot Lighting System provides a high intensity light source designed for the 
following applications: 

• 

with uneven, noisy and scratched surfaces 

• 

where dot peening or laser etching codes are directly marked onto metal surfaces or 
PCBs and need to be highlighted. Here the use of more than one Spot Light can remove 
any shadowing effect. 

• 

in the presence of highly reflective surfaces (metal, glass, etc.) causing direct reflections. 
Low light path to surface angles strongly reduce direct reflections.