Sanyo POA-PN40 사용자 설명서

PJ-NET ORGANIZER

OWNER'S MANUAL

Connection of LAN cable

To  connect  to  the  network,  it  is  required  to  use  the  UTP  (Unshielded Twisted  Pair) 
straight cable with RJ-45 plug. There are two different types of cables depending on 
whether the network is constructed with 10Base-T or 100Base-TX. Prepare the Hub 
(10Base-T or 100Base-TX) to distribute the network cable if required.

 Disconnect the AC plug from the 

projector.

  Connect the UTP straight cable to the 

LAN port on the Network Unit.

  Connect the UTP straight cable to the hub.

✐

  Use the UTP cross cable when you connect the computer and projector directly not using the 

hub.

✐

  When you connect the projector into the 10Base-T network, use cable with category 3 or 5. 

When you connect the projector into the 100Base-TX network, use cable with category 5.

✐

 The length of cable between hub and projector should be less than 100m.

Hub

(10Base-T, 100Base-TX)

UTP straight cable

Projector