Sanyo POA-PN40 사용자 설명서

Conf. & Change page in the light mode

Following functions in the "Conf. & Change" page are 
not available in the light mode.

- Changing the control mode.
- Deleting the registered IP address
- Indicating the each status
- Indicating the each memo

Controlling all together

"Power  &  Status",  "PC  adjustment",  "Control"  and 
"Setting"  can  be  controlled  all  together.  Set  "ON"  the 
multi control setting and adjust controls of each menu. 
The  setting  value  is  applied  to  the  registered  projec-
tors sequentially .

✐

  This is effective only if the mode of the registered projector 

is set to "Control".

Setting all together

"E-mail  setting",  "SNMP  setting"  and  "Timer"  can  be 
set all together. Set "ON" the multi control setting and 
items of each menu. The setting value is applied to the 
registered projectors sequentially.

✐

  This is effective only if the mode of the registered projector 

is set to "Control".

This indicates that the  

mode is "Control".

(Conf.&Change page in the light mode)