Schneider Electric AP9630 사용자 설명서

    APC-Service-Type = Admin

•  Add user names and attributes to the RADIUS “user” file, and verify the password against /etc/passwd. 

The following example is for users 

bconners

 and 

thawk

:

bconners

 Auth-Type = System

  APC-Service-Type = Admin

thawk

  Auth-Type = System

  APC-Service-Type = Device

FreeRADIUS and Microsoft IAS 2003 are supported. Other commonly available RADIUS applications may 
work but have not been fully tested.

Use this option to configure the time (3 minutes by default) that this user interface waits before logging off an 
inactive user. If you change this value, you must log off for the change to take effect.

This timer continues to run if you close the browser window without first logging off (by clicking 

 at the upper right). In that circumstance, no one else can log on until the time specified as 

 expires. 

For example, with 

 at 10 minutes, if you close the browser window without 

logging off, no one else can log on for 10 minutes.