Toshiba XLTR-200 사용자 설명서
53
•
The drive response timeout (in seconds) is assigned via the designated
port’s “Timeout” selection. If “0” is chosen (an invalid timeout time), the
gateway will use a 1s timeout by default.
port’s “Timeout” selection. If “0” is chosen (an invalid timeout time), the
gateway will use a 1s timeout by default.
•
Network characteristics selections
o Baud rate: 2400 / 4800 / 9600 / 19200 / 38400 bps
o Parity: odd / even / none (1 stop bit) / none (2 stop bits)
o Parity: odd / even / none (1 stop bit) / none (2 stop bits)
•
Point parameter number entry radix is hexadecimal (e.g. 10 = 0x0010 or
16
16
10
)