Panasonic KX-THA14 사용자 설명서
Connecting to the Base Unit or to another Computer
14
For assistance, please visit http://www.panasonic.com/phonehelp
Registering the USB
adaptor
adaptor
Before you use the USB adaptor you must
first register it to the base unit, another
USB adaptor, or another Bluetooth device.
first register it to the base unit, another
USB adaptor, or another Bluetooth device.
1
Your computer:
Connect the USB adaptor to your
computer.
Connect the USB adaptor to your
computer.
L
The MULTI TALK V USB Utility starts.
If the software does not start, refer to
the troubleshooting section (page
18).
If the software does not start, refer to
the troubleshooting section (page
18).
2
Click the Data Link Manager icon in the
MULTI TALK V USB Utility-Main Menu
window.
MULTI TALK V USB Utility-Main Menu
window.
L
Data Link Manager window is open.
3
Click [Find Device].
L
All connectable devices are listed in
the Device List.
the Device List.
L
A maximum of 10 devices can be
found.
found.
4
Select the device you would like to
connect to, then click [Find Service].
connect to, then click [Find Service].
L
All available services are listed in the
Service List.
Service List.
L
When you connect to another
computer’s USB adaptor or a
Bluetooth device, skip to step 6.
computer’s USB adaptor or a
Bluetooth device, skip to step 6.
5
Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
L
After {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
the rest of the procedure must be
completed within 2 minutes.
6
Your computer:
Select the desired service, then click
[Connect].
Select the desired service, then click
[Connect].
7
Enter the device’s PIN. (Refer to the
operating instructions provided with the
device.)
operating instructions provided with the
device.)
L
When you access to the base unit or
another USB adaptor, enter the
current 4-digit PIN (default: “7262”).
another USB adaptor, enter the
current 4-digit PIN (default: “7262”).
L
Depending on the Bluetooth device,
the PIN for the device is not required.
the PIN for the device is not required.
8
Click [OK].
L
The animation in the lower left corner
of the Data Link Manager screen
indicates that the connection is
established.
of the Data Link Manager screen
indicates that the connection is
established.
L
If you close the Data Link Manager
window, the current connection is
disconnected.
window, the current connection is
disconnected.
Note:
L
The screen shots in these instructions
are for Windows XP and are included for
reference only.
are for Windows XP and are included for
reference only.
L
The screen shots in these instructions
may differ slightly from the screen
shown on your computer.
may differ slightly from the screen
shown on your computer.
THA14(e).book Page 14 Tuesday, March 7, 2006 5:31 PM