Panasonic WJ-GXE900 사용자 설명서
86
CAMERA CONTROL
When a Panasonic combination camera (WV-CW860, WV-CS850, etc.) or a pan-tilt head is connected to the VIDEO IN
connector of the encoder, it is possible to control the camera using the CGI commands.
connector of the encoder, it is possible to control the camera using the CGI commands.
■ Format
■ Response
■ Item List
Item
Parameter name
Parameter value
Description
Video input channel
CHSEL
1 - 4
To designate VIDEO IN to be controlled
Preset position
PRESET
0 - 64
To move to a preset position set in
advance
advance
0: Home position
1 - 64: Preset position
Horizontal control of the pan-tilt head PAN
–10 - –1
To move left
1 - 10
To move right
Vertical control of the pan-tilt head
TILT
–10 - –1
To move downward
1 - 10
To move upward
Lens
ZOOM
–10 - –1
To move to WIDE
1 - 10
To move to TELE
It will take around 30 ms for one step
increment or decrement of the FOCUS
parameter to adjust focusing.
It will take around 30 ms for one step
increment or decrement of the FOCUS
parameter to adjust focusing.
Auto pan control
ATPAN
on, off
To start/stop auto pan.
Auto focus control
AF
on
Auto focus
Focus control
FOCUS
–10 - –1
NEAR
1 - 10
FAR
It will take around 60 ms for one step
increment or decrement of the ZOOM
parameter to adjust zooming.
It will take around 60 ms for one step
increment or decrement of the ZOOM
parameter to adjust zooming.
HTTP /1.1 204 No Content
CR
LF
Cache-Control: no-cache
CR
LF
Content-Type: text/plain
CR
LF
Content-Length: 0
CR
LF
CR
LF
http://(IP address of the encoder)/cgi-bin/camctrl.cgi?CHSEL=(parameter value)&(parameter name)=(parameter
value)&...&(parameter name)=(parameter value)
HOW TO USE THE CGI COMMANDS