Panasonic WJ-GXD900 사용자 설명서

41

To perform the settings of the encoder, display the top
page of the encoder first.
Refer to the network administrator about the required
network addresses (IP addresses, etc.).

1. Enter the IP address of the encoder in the address

box of the web browser and press the Enter key.
For example, enter the default IP address of the
encoder "192.168.0.10" in the address box of the
web browser and press the Enter key.

http://192.168.0.10/

The top page will be displayed.

2. Click a desired button in the left column on the top

page.
The authentication dialog window will be displayed.

Enter a user name whose access level is 1
(ADMINISTRATOR) and a password, and click the [OK]
button.
If the entered user name and password are registered,
the settings page will be displayed.

When no user is registered yet, enter the default user
name (admin) and password (blank: enter nothing).
(To register users, go to the USER page.)

When authenticated, the top page will be displayed
again.
When authenticated once, the authentication dialog
window will not be displayed by clicking the buttons in
the left column until the web browser window is closed.

The items on the next page can be checked or changed
on each settings page.
Click the [SET] button after changing the settings.