Panasonic BBHGW700A 사용자 설명서
Operating Instructions
42
Changing the Setup of Automatically Registered Cameras
Notes
•
With cameras that have the option of enabling images to be accessed from the Internet,
follow the setup guidelines specified in the camera's Operating Instructions.
follow the setup guidelines specified in the camera's Operating Instructions.
•
The port number and IP address of automatically registered cameras cannot be modified.
•
If you click Confirm, the camera image will appear.
•
It may not be possible to open an automatically registered IPv6 camera from the WAN side
using the Camera Portal, when using Internet Explorer 6.0 or later. It should be possible to
open it using a browser where you can specify an IPv6 address directly into the URL (e.g.
Mozilla 1.7.1 or later). However, using a browser other than Internet Explorer 6.0 or later is
not under warranty. See page 19 when making camera images accessible from the Internet.
using the Camera Portal, when using Internet Explorer 6.0 or later. It should be possible to
open it using a browser where you can specify an IPv6 address directly into the URL (e.g.
Mozilla 1.7.1 or later). However, using a browser other than Internet Explorer 6.0 or later is
not under warranty. See page 19 when making camera images accessible from the Internet.
1.
Click [Camera] on the setup page.
2.
Click Modify/Delete under the Operation
heading.
heading.
3.
Set the required fields and click [Modify].
•
To delete a registered camera, click
[Delete].
[Delete].
4.
When setup is complete, click [Save].
•
The entered information is saved.
5.
When [Restart] is displayed on the setup page,
click it.
click it.