Panasonic WV-CU650 사용자 설명서
52
4. Press the ENTER or CAM (SET) button.
The sub menu of selected function will appear on the
LCD.
LCD.
5. Perform the operations to activate the selected function.
The operating procedure differs depending on each
function. Refer to pp. 55 to p. 73.
function. Refer to pp. 55 to p. 73.
6. To exit the sub menu, press the EXIT or MON (ESC)
button. The LCD display will return to the main menu.
7. To exit the main menu, press the EXIT or MON (ESC)
button again. The LCD display will return to the default
status.
status.
■ Factory Default Setting of
Button Functions and Joystick
Button Functions
Button Functions
The following functions have been assigned to the function
(F1 to F8) buttons and joystick function (A, B, and top) but-
tons.
(F1 to F8) buttons and joystick function (A, B, and top) but-
tons.
Note: To change the default assignments, refer to To
Assign Menu Functions to Function Buttons, or p. 53 To
Assign Menu Functions to Joystick Function Buttons.
Assign Menu Functions to Joystick Function Buttons.
F1: Camera Setup
F2: Auto Mode
F3: BW Mode
F4: Patrol Learn
F5 (SHIFT + F1): System Setup
F6 (SHIFT + F2): HD300 A – B Repeat
F7 (SHIFT + F3): HD300 Listed
F8 (SHIFT + F4): HD300 Disk Select
A: Iris Reset
B: Auto Focus
Top: Auto Focus
■ To Assign Menu Functions to
Function Buttons
All menu functions are assignable to the function (F1 to F8)
buttons. (Refer to pp. 55 to 73 for each function.)
buttons. (Refer to pp. 55 to 73 for each function.)
1. Press the MENU button.
“Camera Setup” main menu will appear on the LCD.
Camera Setup F1
On Off Rst A.Rst
Iris Reset A
Auto Focus B
Auto Focus J/S
Auto Mode F2
Seq Sort Pan Patrol
BW Mode F3
On Off Auto1 Auto2
HD300 DiskSelect F8
Nr-A Cp–A Cpy1 Cpy2
System Setup 301
On Off
Mon01 Cam016 HD316
F1 F2 F3 F4
LCD MENU SYS 301
System Setup
Patrol Learn F4
Start Stop
System Setup F5
On Off
HD300 A—B Repeat F6
Start End Cancel
HD300 Listed F7
On Off