Panasonic AW-DU600 사용자 설명서
6
Connections
Transmitting system connections
Connect the control panel
When an AW-RP605 is used
Turn off the power of all components before proceeding with the connections.
O
When an AW-RP301 or AW-RP501 is being used,
connect the receiving pan-tilt head system to the P1
CONTROL OUT connector.
connect the receiving pan-tilt head system to the P1
CONTROL OUT connector.
O
When an AW-RP505 or AW-RP605 is being used, it is
possible to select either P1, P2, P3, P4 or P5 for the
connected pan-tilt head system using the CONTROL
button on the controller.
possible to select either P1, P2, P3, P4 or P5 for the
connected pan-tilt head system using the CONTROL
button on the controller.
O
When an AW-RP301, AW-RP501 or AW-RP505 is
being used as the controller, an AW-PH350 can not be
used as the pan-tilt head.
being used as the controller, an AW-PH350 can not be
used as the pan-tilt head.
Version 45 or higher of the software must be installed in
the AW-RP605.
Consult with your local dealer to check which software
version is currently installed.
the AW-RP605.
Consult with your local dealer to check which software
version is currently installed.
Telephone line
Modem
AW-DU600
AW-PS301
Coaxial cable
(5C-2V)
10Base-T cable
RS-232C cable
AW-PS301
Control
panel
Telephone line
Modem
AW-DU600
AC adapter
AW-PS505
AC adapter
AW-PS301
10Base-T cable
AW-RP605
Control panel
AW-RP605
Main unit
Set the control panel
selector switch to A.
Set the control panel
selector switch to B.